Custom Built TYPE-A Rifles, Firearms
$1,599.00
| CALIBER: | 5.56 NATO or 300BLK |
| CLASSIFICATION: | Pistol w/SB A3 Brace |
| BARREL LENGTH: | 10.5″ |
| HANDGUARD: | SPR/9.875 GEN3 MLOK |
| GAS SYSTEM: | Direct Impingement |
| LENGTH: | Carbine |
| TRIGGER: | 2-Stage |
| MUZZLE: | ASR suppressor ready |
| BCG: | QPQ W/R.E.M Polish |
| OVERALL LENGTH: | 27″ (25″ Buffer Tube to Threads) |
| FIRE SELECTOR: | Ambie-Short Throw Adjustable |
| WEIGHT: | Classified |
We had two things in mind when it came to redesigning the SPR GEN3 Platform; weight reduction and functionality. Our first improvement started with functionality on the lower receiver components. We moved away from standard mil-spec components, upgrading to a ambi billet adjustable 90°/45° short throw fire selector, extended billet magazine release, improved pivot/breakdown pins, and most importantly stainless steel detents/springs/roll pins/trigger pins/etc. Our second functionality improvement came from the upper receiver and since we were on a mission to make this rifle semi ambidextrous, we decided to upgrade to our ambi charging handle. The next upgrade came in the form of weight reduction on the font end. We made some weight improvements on our all new GEN3 SPR/9.875 handguard by opening up the offsets to accept M-LOK attachments and off-setting an optional 45° QD M-LOK insert towards the backend of the handguard. The last upgrade was to improve the overall gas flow by making improvements to our gas management system from front to back.
This TYPE-A SPR/10.5 is built on a ridged Pistol platform with proven components to make it an incredibly versatile firearm. The SPR/10.5 Pistol is equipped with a 10.5″ vanadium alloy steel barrel (for weight reduction) and a SPR/9.875 GEN2 MLOK Handguard with a SILENCERCO ASR muzzle to give it that aggressive stance. Fully furnished with B5 furniture, SB A3 pistol brace and 30 round capacity magazines. The TYPE-A SPR/10.5 Pistol is driven by our TYPE-A QPQ coated bolt carrier group w/R.E.M. Polish. It’s also equipped with a DGI (direct gas impingement) system and our new TYPE-A PMC Straight 2-stage trigger to give it consistent reliability time after time.
NOTE: All of our pistols are Hardcoat Anodized and then Cerakoted to give you a longer lasting more durable finish. We wanted your rifle to wear to the anodized finish vs. the raw aluminum surface. Just another added benefit making your rifle….TYPE-A.
You must be logged in to post a review.
"If you’re new to an AR platform, here’s the best advice I can give when it comes to cleaning and lube: Run your bolts wet. You obviously want to keep it clean. Should you clean after every range session? Yes. Is it the end of the world if you don’t? No. A well-built rifle like the TYPE-A's can take abuse and run dirty. They just perform better, and last longer, the more you clean them. In order to keep them cycling with all sort of different ammo requires good lubrication. The areas to focus on are the bolt and carrier. As you’re reassembling, give the bolt a healthy dose of lube as well as the carrier. Not to the point of dripping off, but just shy of. Understand the less viscous the lube, the quicker it will burn off and dry out. Using something a little thicker will last longer in your gun. I’ve known guys who used motor oil. These guns aren’t picky as long as you keep them wet."
-Jason Gady
PewPewLifeGR –
Couldn’t be happier with my TYPE-A SIPR/10.5 GEN3 300BLK PISTOL. It’s a great build and the SB Tactical A3 brace is a quality option on this tool. Initially my SIPR came with a 5.56/.223 Magpul mag, but after talking with the guys at BG Defense about the 300BLK Magpul mag, they ordered me one and sent it my way free of charge. Great guys, great products, and great customer service. Can’t wait to get my next one!