Custom Built TYPE-A Rifles, Firearms
$1,978.99
| CALIBER: | 5.56 NATO or 300BLK |
| CLASSIFICATION: | SBR w/Folder |
| BARREL LENGTH: | 10.5″ |
| HANDGUARD: | SPR/9.875 GEN3 MLOK |
| GAS SYSTEM: | Direct Impingement |
| GAS LENGTH: | Carbine |
| TRIGGER: | 2-Stage |
| MUZZLE: | ASR Suppressor Ready |
| BCG: | QPQ W/R.E.M Polish |
| OVERALL LENGTH: | 26″ Buffer Tube to Threads |
| FIRE SELECTOR: | Ambi-Short Throw Adjustable |
| WEIGHT: | Classified |
We had two things in mind when it came to redesigning the SPR GEN3 Platform; weight reduction and functionality. Our first improvement started with functionality on the lower receiver components. We moved away from standard mil-spec components, upgrading to a ambi billet adjustable 90°/45° short throw fire selector, extended billet magazine release, improved pivot/breakdown pins, and most importantly stainless steel detents/springs/roll pins/trigger pins/etc. Our second functionality improvement came from the upper receiver and since we were on a mission to make this rifle semi ambidextrous, we decided to upgrade to a ambi charging handle. The next upgrade came in the form of weight reduction on the font end. We made some weight improvements on our all new GEN3 SIPR/9.875 handguard by opening up the offsets to accept M-LOK attachments and off-setting an optional 45° QD M-LOK insert towards the backend of the handguard. The last upgrade was to improve the overall gas flow by making improvements to our gas management system from front to back.
This TYPE-A SPR-10.5 is built on a ridged Pistol platform with proven mil-spec components to make it an incredibly versatile firearm. The SPR/10.5 SBR is equipped with a 10.5″ vanadium alloy fluted steel barrel (for weight reduction) and a SPR/9.875 GEN3 MLOK Handguard with a ASR Ready muzzle to give it that aggressive stance. Fully furnished with B5 furniture, Law Tactical GEN3 Folder and 30 round capacity magazines. The TYPE-A SPR-10.5 SBR is driven by our TYPE-A QPQ coated bolt carrier group w/R.E.M. Polish. It’s also equipped with a DGI (direct gas impingement) system and our new TYPE-A PMC Straight 2-stage trigger to give it consistent reliability time after time.
NOTE: All of our pistols are Hardcoat Anodized and then Cerakoted to give you a longer lasting more durable finish. We wanted your rifle to wear to the anodized finish vs. the raw aluminum surface. Just another added benefit making your rifle….TYPE-A.
Note: Any H-Series Cerakote can be sprayed. There is a $30 up-charge if the color is not in our stock.
Note: Any H-Series Cerakote can be sprayed. There is a $30 up-charge if the color is not in our stock.
You must be logged in to post a review.
"Considering getting into an AR9? Here’s some things to consider: 1) A PCC can broaden the scope of your training. There are many ranges that don’t allow rifles but will allow handgun cartridges. A PCC also allows you to train on steel much closer than you would with a traditional 5.56 or variant. 2) A shoulder-fired 9mm is a great rifle the whole family can enjoy. There’s virtually no recoil and they’re much quieter than a traditional AR (even unsuppressed). 3) They’re relatively cheap to run. 4) PCC’s make great home-defense options. Not saying there’s anything wrong with a 5.56 for home defense. Just consider your environment, shot ranges, and round performance of possible misses (5.56 compared to 9mm through drywall, studs, and other building materials). Noise may be another consideration. If you run suppressed then either platform is no problem, however open muzzle indoors? The 9mm is less likely to deafen someone. 5) They do not run as dirty. Since a PCC is a blowback system, you won’t get the same carbon buildup as with a direct gas rifle. 6) There’s nothing more fun about shooting a 9mm from your shoulder."
Reviews
There are no reviews yet.