$1,899.00
| CALIBER: | 5.56 NATO or 300BLK |
| CLASSIFICATION: | Pistol w/SB A3 Brace |
| BARREL LENGTH: | 10.5″ |
| HANDGUARD: | SPR/9.875 GEN3 MLOK |
| GAS SYSTEM: | 30 Position Adjustable |
| LENGTH: | Carbine |
| TRIGGER: | 2-Stage |
| MUZZLE: | ASR suppressor ready |
| BCG: | QPQ W/R.E.M Polish |
| OVERALL LENGTH: | 27″ (25″ Buffer Tube to Threads) |
| FIRE SELECTOR: | Ambie-Short Throw Adjustable |
| WEIGHT: | Classified |
We had two things in mind when it came to redesigning the SPR GEN3 Platform; weight reduction and functionality. Our first improvement started with functionality on the lower receiver components. We moved away from standard mil-spec components, upgrading to a ambi billet adjustable 90°/45° short throw fire selector, extended billet magazine release, improved pivot/breakdown pins, and most importantly stainless steel detents/springs/roll pins/trigger pins/etc. Our second functionality improvement came from the upper receiver and since we were on a mission to make this rifle semi ambidextrous, we decided to upgrade to our ambi charging handle. The next upgrade came in the form of weight reduction on the font end. We made some weight improvements on our all new GEN3 SPR/9.875 handguard by opening up the offsets to accept M-LOK attachments and off-setting an optional 45° QD M-LOK insert towards the backend of the handguard. The last upgrade was to improve the overall gas flow by making improvements to our gas management system from front to back.
This TYPE-A SPR/10.5 is built on a ridged Pistol platform with proven components to make it an incredibly versatile firearm. The SPR/10.5 Pistol is equipped with a 10.5″ 416R lightweight contour stainless steel barrel and a SPR/9.875 GEN2 MLOK Handguard with a SILENCERCO ASR muzzle to give it that aggressive stance. Fully furnished with B5 furniture, SB A3 pistol brace and 30 round capacity magazines. The TYPE-A SPR/10.5 Pistol is driven by our TYPE-A QPQ coated bolt carrier group w/R.E.M. Polish. It’s also equipped with a 416R stainless steel (matte finish) 30 position adjustable gas block and our new TYPE-A PMC Straight 2-stage trigger to give it consistent reliability time after time.
NOTE: All of our pistols are Hardcoat Anodized and then Cerakoted to give you a longer lasting more durable finish. We wanted your rifle to wear to the anodized finish vs. the raw aluminum surface. Just another added benefit making your rifle….TYPE-A.
You must be logged in to post a review.
"If you are new to the AR platform, be sure to figure out the main purpose of your rifle. If you want to kit out your rifle with the sole intent of looking sexy in the mirror, then load it up. If you don’t want to waste money, and get the best shooting experience out of your rifle, then consider the following: Start with optics. Do you plan to run anything other than irons? If so, mount the best quality optic you can afford. If you use an optic (magnified or non-magnified), plan on mounting a backup sighting system…..such as offset irons. Next, will this be a work or home defense gun? If yes, you better throw a light on the rail. There’s a million different options out there but be sure to pick one that meets your needs without taking up unnecessary real estate on your gun. Also, will you be mounting a sling? If you’re going to use the rifle, at all, you definitely want a way to hang it off your torso. I would consider anything beyond these accessories as extra. Spend some time behind your rifle and work on the basics. From there, you can figure out what else you might want (vertical grips, different stock……..). If it’s loaded down heavy to start, you’ll probably end up stripping stuff off the more you train with it. Spending money on ammo is much more valuable than unused accessories."
- Jason Gady
Reviews
There are no reviews yet.