BG Defense

Find A Dealer

This SPR-11.5 Short Stroke Piston Rifle is chambered in 5.56 NATO.
Built on a 11.5" light weight contour 416R stainless steel barrel with a 1/2x28 thread pitch.
The SPR-11.5 runs a patented "Bleed Off" gas piston system. Built gas pressure within the block is reduced only to the amount required to drive/cycle the carrier. All remaining gas is bled out of the block allowing the system to run cleaner and noticeably cooler. This will reduce your weapons recoil and eliminate blow back while running suppressed. This block is fully adjustable up to 30 positions allowing you to fine tune your system unlike most systems which only allows 3-4 positions.
The carrier is coated in Titanium Nitride while the bolt is coated in Nitride. Titanium Nitride (TiN) coating is a wear resistant, inert, and reduces friction. Titanium Nitride also reduces galling between sliding components and improves overall life.
This pistol comes equipped with a Law Tactical GEN3 Folder. While the Folder does add cost, it gives you the ability to reduce the overall length while concealing during transportation.
Our pistols run a fully adjustable 45/90 degree short throw safety selector and an extended magazine release to give you that perfect feel. Our charging handle is fully Ambi giving you complete control from either side.
This rifle runs our TYPE-A PMC Two-Stage Trigger. Constructed from pre-hardened 4140 this trigger is coated in Nickel Teflon to fight against friction and to ensure lubricity. The PMC Two-Stage Trigger ships at 1 1/2 reset to 3 1/2 trigger pull.

TYPE-A SPR-11.5 PISTON A3 PISTOL CONTRACTOR W/FOLDER

$2,499.00

SHARE

Quick Specs

CALIBER: 5.56 NATO
CLASSIFICATION: Pistol w/SB A3 Brace & Folder
BARREL LENGTH: 11.5″
HANDGUARD: SPR/9.875 GEN3 MLOK
PISTON SYSTEM: 30 Position Adjustable Short Stroke
LENGTH: Carbine
TRIGGER: 2-Stage
MUZZLE: ASR
BCG: Titanium Nitride Carrier/w Nitrided Bolt
OVERALL LENGTH: OAL
Ambi-Short Throw Adjustable
WEIGHT: Classified

 

Description

This TYPE-A SPR-11.5 GEN3 CONTRACTOR is built on a ridged piston platform with improved lower components to make it an incredibly versatile pistol. The SPR-11.5 CONTRACTOR is equipped with a 11.5″ 416R lightweight contour stainless steel barrel, an improved SPR/9.875 GEN3 MLOK Handguard with a SILENCERCO ASR muzzle brake.  Fully furnished with B5 furniture, a Law Tactical GEN3 Folder and 30 round capacity magazines. The TYPE-A SPR-11.5 CONTRACTOR is driven by our TYPE-A Titanium Nitride carrier and a 30 position fully adjustable short stroke piston system.   It’s also equipped with our TYPE-A PMC Straight 2-stage trigger to give it consistent reliability time after time.

NOTE:  All of our rifles are Hardcoat Anodized and then Cerakoted to give you a longer lasting more durable finish.  We wanted your rifle to wear to the anodized finish vs. the raw aluminum surface.  Just another added benefit making your rifle….TYPE-A.

Colors Available (Shown in Armor Black)

  • Magpul™ Olive Drab Green (H-232Q)
  • Magpul™ Flat Dark Earth (H-267Q)
  • Noveske™ Bazooka Green (H-189Q)
  • Tungsten (H-237Q)
  • SIG™ Dark Grey (H-210Q)
  • Multi-Tone FDE – Special
  • Armor Black (H-190Q)

 

Features

*(OPTICS/LIGHTS NOT INCLUDED)

BARREL

  • Caliber: 5.56 NATO
  • Length: TYPE-A 11.5″ Lightweight Contour Barrel
  • Block: 30 Position Adjustable Short Stroke Block
  • Material: 416R Stainless Steel
  • Piston System: Carbine Length
  • Twist Rate: 1:7 twist
  • Finish: Matte Finish
  • Thread: 1/2×28
  • Muzzle Device: ASR Ready Muzzle Brake – 1/2×28

UPPER RECEIVER

  • Platform: SPR GEN3 Precision Machined 7075-t6 Aluminum Upper Receiver with Extended Feed Ramps
  • Finish: Option
    • Black – MIL-A-8625, Type-III, Class 2
    • Color – Type-III Anodizing with Cerakote Ceramic Coatings
  • Charging Handle: TYPE-A Ambi Charging Handle
  • BOLT CARRIER GROUP: TYPE-A TITANIUM NITRIDE BOLT CARRIER GROUP 
  • CARRIER:
    • Semi-Auto Bolt Carrier
    • Gas Key (Staked)
    • Gas Key Hardened to USGI Specifications
    • Grade 8 Hardened Fasteners
    • Finish: Ti Nitride
  • BOLT ASSEMBLY:
    • Case Hardened, Shot Peened & MPI Tested
    • Extractor (Fully Assembled)
    • Finish: QPQ

LOWER RECEIVER

  • Platform: SPR GEN3 Precision Machined 7075-t6 Aluminum Lower Receiver
  • Finish: Option
    • Black – MIL-A-8625, Type-III, Class 2
    • Color – Type III Anodizing with Cerakote Ceramic Coatings
  • Trigger: TYPE-A PMC 2-Stage Straight Trigger (3.5lb.)
  • Extension:Carbine 6-Position Buffer Tube W/Flat Spring
  • End Plate: TYPE-A QD Single Point End Plate (4140 Pre-Hard)
  • Fire Selector: TYPE-A Ambi Billet 90°/45° Adjustable Short Throw Selector
  • Magazine Release: TYPE-A Extended Billet Mag Release
  • Lower Parts: Stainless Steel/Aluminum Detents & Springs

HANDGUARD/RAIL

  • Platform: Option
    • TYPE-A SPR/9.875 GEN3 M-LOK Handguard (8.3 oz.)
  • Finish: Option
    • Black – MIL-A-8625, Type-III, Class 2
    • Color – Type-III Anodizing with Cerakote Ceramic Coatings

FURNITURE

  • Stock: SB Tactical A3 Brace – BLK
  • Folder: Law Tactical™ GEN3 Folder – BLK
  • Grip: B5 TYPE 23 P-GRIP – BLK

ACCESSORIES (INCLUDED W/RIFLE)

  • Magazine: MAGPUL PMAG 30 AR/M Magazine
  • Soft Case: 36″ Single Rifle Case
  • ****please note: All NFA rules apply. Please check with your local state laws.
  • ****Please note: Optic & Can not included

Colors Available (Shown in Armor Black)

  • Magpul™ Olive Drab Green (H-232Q)
  • Magpul™ Flat Dark Earth (H-267Q)
  • Noveske™ Bazooka Green (H-189Q)
  • Tungsten (H-237Q)
  • SIG™ Dark Grey (H-210Q)
  • Multi-Tone FDE – Special
  • Armor Black (H-190Q)

Downloads

Accessorizing your Rifle

"If you are new to the AR platform, be sure to figure out the main purpose of your rifle.  If you want to kit out your rifle with the sole intent of looking sexy in the mirror, then load it up.  If you don’t want to waste money, and get the best shooting experience out of your rifle, then consider the following: Start with optics.  Do you plan to run anything other than irons?  If so, mount the best quality optic you can afford.  If you use an optic (magnified or non-magnified), plan on mounting a backup sighting system…..such as offset irons.  Next, will this be a work or home defense gun?  If yes, you better throw a light on the rail.  There’s a million different options out there but be sure to pick one that meets your needs without taking up unnecessary real estate on your gun.  Also, will you be mounting a sling?  If you’re going to use the rifle, at all, you definitely want a way to hang it off your torso. I would consider anything beyond these accessories as extra. Spend some time behind your rifle and work on the basics.  From there, you can figure out what else you might want (vertical grips, different stock……..).  If it’s loaded down heavy to start, you’ll probably end up stripping stuff off the more you train with it.  Spending money on ammo is much more valuable than unused accessories."

- Jason Gady

Related products