BG Defense

Custom Built TYPE-A Rifles, Firearms

Find A Dealer

This SPR-14.5 Carbine is chambered in .308 WIN
This platform is built on a 14.5" Lightweight Profile 416R stainless steel barrel with a carbine gas system for repeatability.
This DI rifle comes equipped with an 416R stainless steel 30 position adjustable gas block to give you the ability to make adjustments. This will give you the ability to fine tune your rifle to the ammo, buffer/buffer spring, and/or suppressed.
All of our Bolt Carriers go through a R.E.M Polish process prior to nitride coating. The R.E.M Polish process reduces friction, improves part durability, improves oil retention, and improves contact & bending fatigue. Our Bolts are MPI (Magnetic Particle Inspected) and coated in a durable nitride finish.
Our rifles run a fully adjustable 45/90 degree short throw safety selector and an extended magazine release to give you that perfect feel. Our charging handle is fully Ambi giving you complete control from either side.
This rifle has an 14.5" 416R stainless steel barrel with an Silencerco ASR that is permanently affixed. This is done by pinning and welding the muzzle to achieve the over 16" barrel length requirements. Other muzzles options available upon request.
This rifle runs our TYPE-A PMC Two-Stage Trigger. Constructed from pre-hardened 4140 this trigger is coated in Nickel Teflon to fight against friction and to ensure lubricity. The PMC Two-Stage Trigger ships at 1 1/2 reset to 3 1/2 trigger pull.

14.5 .308WIN CARBINE RIFLE PINNED & WELDED

$2,899.00

SHARE

Quick Specs

CALIBER: 308 Win
CLASSIFICATION: Carbine Pinned & Welded
BARREL LENGTH: 14.5″
HANDGUARD: SPR/13.5 AR10 GEN3 MLOK
GAS SYSTEM: 30 Position Adjustable
LENGTH: Carbine
TRIGGER: 2-Stage
MUZZLE: ASR suppressor ready
BCG: QPQ W/R.E.M Polish
OVERALL LENGTH: 33.5″
FIRE SELECTOR: Ambi-Short Throw Adjustable
WEIGHT: Classified

 

Description

The 308 Platform started as a simple request from a Law Enforcement Department to manufacture a 308 in a short platform for dense populated areas.  So we did just that.  We knew we wanted to stay with a traditional AR10 large frame so we married the Armalite cut with some key feature of the DPMS SR-25.  This is one of the first platforms where weight wasn’t our first consideration.  We wanted a stout and accurate system that had an aggressive stance.

This TYPE-A SPR-14.5 is built on our all new AR10 Armalite platform with upgraded mil-spec components to make it an incredibly versatile firearm. The SPR-14.5 Carbine is equipped with a 14.5″ 416R Stainless Steel Lightweight Contour barrel, a 416R Stainless Steel 30 position adjustable gas block  and a SPR/13.5 GEN2 MLOK Handguard with a pinned & welded SILENCERCO ASR muzzle brake to give it that aggressive stance. Fully furnished with B5 furniture (B5 SOPMOD & B5 P-GRIP 23) and 20 round capacity magazines. The TYPE-A SPR-14.5 Carbine is driven by our TYPE-A QPQ coated bolt carrier group w/R.E.M. Polish.  It’s also equipped with our improved TYPE-A PMC Straight 2-stage trigger to give it consistent reliability time after time.

NOTE:  All of our pistols are Hardcoat Anodized and then Cerakoted to give you a longer lasting more durable finish.  We wanted your rifle to wear to the anodized finish vs. the raw aluminum surface.  Just another added benefit making your rifle….TYPE-A.

Colors Available (Shown in Multi-tone FDE)

  • Magpul™ Flat Dark Earth (H-267Q)
  • Sig™Dark Grey (H-210Q)
  • Noveske™ Bazooka Green (H-189Q))
  • Tungsten (H-237Q)
  • Magpul™ Olive Drab (H-232Q)
  • Multi-tone FDE – Special Order
  • Armor Black (H-190Q)

Features

*(OPTICS/LIGHTS NOT INCLUDED)

BARREL

  • Caliber: 308 Win
  • Length: TYPE-A 14.5″ Lightweight Contour Barrel
  • Material: 416R Stainless Steel w/Matte Finish
  • Twist Rate: 1:10 twist
  • Finish: Matte Finish
  • Thread: 5/8 X 24
  • Muzzle Device: SILENCERCO ASR Muzzle Brake pinned & Welded – 5/8 X 24
    • Note: Other muzzle brakes available upon request.
  • Gas Block – 416R SS 30 Position Adjustable Gas Block

UPPER RECEIVER

  • Platform: SPR Precision Machined 7075-t6 Aluminum Upper Receiver with Extended Feed Ramps – Armalite
  • Finish: Option
    • Black – MIL-A-8625, Type-III, Class 2
    • Color – Type-III Anodizing with Cerakote Ceramic Coatings
  • Charging Handle: TYPE-A Raptor-LT Ambi Charging Handle
  • BOLT CARRIE GROUP: TYPE-A QPQ W/REM POLISH BOLT CARRIER GROUP
  • CARRIER:
    • Semi-Auto Bolt Carrier
    • Gas Key (Staked)
    • Gas Key Hardened to USGI Specifications
    • Grade 8 Hardened Fasteners
  • BOLT ASSEMBLY:
    • Case Hardened, Shot Peened & MPI Tested
    • Extractor (Fully Assembled)

LOWER RECEIVER

  • Platform: SPR Precision Machined 7075-t6 Aluminum Lower Receiver – Armalite
  • Finish: Option
    • Black – MIL-A-8625, Type-III, Class 2
    • Color – Type III Anodizing with Cerakote Ceramic Coatings
  • Trigger: TYPE-A PMC 2-Stage Straight Trigger (3.5lb.)
  • Extension: Carbine 6-Position Buffer Tube
  • End Plate: TYPE-A QD Single Point End Plate (4140 Pre-Hard)
  • Fire Selector: TYPE-A Ambi Billet 90°/45° Adjustable Short Throw Selector
  • Magazine Release: TYPE-A Extended Billet Mag Release
  • Lower Parts: Stainless Steel/Aluminum Detents & Springs

HANDGUARD/RAIL

  • Platform: Option
    • TYPE-A SPR/13.5 AR10 GEN3 M-LOK Handguard
  • Finish: Option
    • Black – MIL-A-8625, Type-III, Class 2
    • Color – Type-III Anodizing with Cerakote Ceramic Coatings

FURNITURE

  • Stock: B5 SOPMOD STK Buttstock – BLK
  • Grip: B5 P-GRIP 23 Pistol Grip – BLK

ACCESSORIES (INCLUDED W/RIFLE)

  • Magazine: MAGPUL PMAG 20AR/M Magazine
  • Soft Case  36″ Single Rifle Case
  • ****please note: All NFA rules apply. Please check with your local state laws.
  • ****Please note: Optic & Can not included

Colors Available (Shown in Multi-tone FDE)

  • Magpul™ Flat Dark Earth (H-267Q)
  • Sig™Dark Grey (H-210Q)
  • Noveske™ Bazooka Green (H-189Q))
  • Tungsten (H-237Q)
  • Magpul™ Olive Drab (H-232Q)
  • Multi-tone FDE – Special Order
  • Armor Black (H-190Q)

Reviews

There are no reviews yet.

Be the first to review “14.5 .308WIN CARBINE RIFLE PINNED & WELDED”

Downloads

Accessorizing your Rifle

"If you are new to the AR platform, be sure to figure out the main purpose of your rifle.  If you want to kit out your rifle with the sole intent of looking sexy in the mirror, then load it up.  If you don’t want to waste money, and get the best shooting experience out of your rifle, then consider the following: Start with optics.  Do you plan to run anything other than irons?  If so, mount the best quality optic you can afford.  If you use an optic (magnified or non-magnified), plan on mounting a backup sighting system…..such as offset irons.  Next, will this be a work or home defense gun?  If yes, you better throw a light on the rail.  There’s a million different options out there but be sure to pick one that meets your needs without taking up unnecessary real estate on your gun.  Also, will you be mounting a sling?  If you’re going to use the rifle, at all, you definitely want a way to hang it off your torso. I would consider anything beyond these accessories as extra. Spend some time behind your rifle and work on the basics.  From there, you can figure out what else you might want (vertical grips, different stock……..).  If it’s loaded down heavy to start, you’ll probably end up stripping stuff off the more you train with it.  Spending money on ammo is much more valuable than unused accessories."

- Jason Gady

Related products