BG Defense

Find A Dealer

This carbine in chambered in 5.56 NATO only. Special orders for 300BLK are available.
This platform is built on a 14.5" M4 Profile 41v50 barrel with a 1/2X38 thread pitch.
Our 14.5" Direct Impingement Rifle run a mid gas system for reliability and consistency. Carbine Gas Systems available as well.
All of our Bolt Carriers go through a R.E.M Polish process prior to Nitride coating. The R.E.M Polish process reduces friction, improves part durability, improves oil retention, and improves contact & bending fatigue. Our Bolts are MPI (Magnetic Particle Inspected) and coated in a durable Nitride finish.
The SPR-14.5 Carbine Rifle runs our TYPE-A SPR-13.5 GEN3 MLOK Handguard which allows the shooter a shorter platform.
This rifle has an 14.5" 41v50 barrel with an ASR Ready Brake that is permanently affixed. This is done by pinning and welding the muzzle to achieve the over 16" barrel length requirements. Other muzzles options available upon request.
This rifle runs our TYPE-A PMC Two-Stage Trigger. Constructed from pre-hardened 4140 this trigger is coated in Nickel Teflon to fight against friction and to ensure lubricity. The PMC Two-Stage Trigger ships at 1 1/2 reset to 3 1/2 trigger pull.

14.5 GEN 3 CARBINE RIFLE PINNED & WELDED

$1,599.00

SHARE

Quick Specs

CALIBER: 5.56 NATO
CLASSIFICATION: Carbine
BARREL LENGTH: 14.5″
HANDGUARD: SPR/13.5 GEN3 MLOK
GAS SYSTEM: Direct Impingement
GAS LENGTH: Mid Length
TRIGGER: 2-Stage
MUZZLE: ASR Pinned & Welded
BCG: QPQ W/R.E.M Polish
OVERALL LENGTH: 32.5″ OAL
FIRE SELECTOR: Ambi-Short Throw Adjustable
WEIGHT: Classified

 

Description

This TYPE-A SPR-14.5 GEN3 is built on a ridged Carbine platform with improved lower components to make it an incredibly versatile rifle. The SPR-14.5 Carbine is equipped with a 14.5″ QPQ vanadium alloy steel barrel (for weight reduction), an improved SPR/13.5 GEN3 MLOK Handguard with an ASR Ready muzzle brake that is permanently pinned & welded to give you a full 16″ platform.  Fully furnished with B5 furniture, and 30 round capacity magazines. The TYPE-A SPR-14.5 Carbine Rifles is driven by our TYPE-A QPQ coated bolt carrier group w/R.E.M. Polish.  It’s also equipped with a low pro gas block and our new TYPE-A PMC Straight 2-stage trigger to give it consistent reliability time after time.

NOTE:  All of our rifles are Hardcoat Anodized and then Cerakoted to give you a longer lasting more durable finish.  We wanted your rifle to wear to the anodized finish vs. the raw aluminum surface.  Just another added benefit making your rifle….TYPE-A.

Colors Available (Shown in Armor Black)

Note: Any H-Series Cerakote can be sprayed.  There is a $30 up-charge if the color is not in our stock.

  • Magpul™ Olive Drab Green (H-232Q)
  • Magpul™ Flat Dark Earth (H-267Q)
  • Noveske™ Bazooka Green (H-189Q)
  • Tungsten (H-237Q)
  • SIG™ Dark Grey (H-210Q)

 

Features

*(OPTICS/LIGHTS NOT INCLUDED)

BARREL

  • Caliber: 5.56 NATO
  • Length: TYPE-A 14.5″ Lightweight Contour Barrel
  • Gas block: Improved Flow Micro .750 Gas Block (Removable) – QPQ Finish
  • Material: 416R Stainless Steel
  • Gas System: Carbine Length
  • Twist Rate: 1:7 twist
  • Finish: Matte Finish
  • Thread: 1/2×28
  • Muzzle Device: ASR Ready Muzzle Brake – 1/2×28

UPPER RECEIVER

  • Platform: SPR GEN3 Precision Machined 7075-t6 Aluminum Upper Receiver with Extended Feed Ramps
  • Finish: Option
    • Black – MIL-A-8625, Type-III, Class 2
    • Color – Type-III Anodizing with Cerakote Ceramic Coatings
  • Charging Handle: TYPE-A Ambi Charging Handle
  • BOLT CARRIER GROUP: TYPE-A TiN W/REM POLISH BOLT CARRIER GROUP
  • CARRIER:
    • Semi-Auto Bolt Carrier
    • Gas Key (Staked)
    • Gas Key Hardened to USGI Specifications
    • Grade 8 Hardened Fasteners
    • Coating: QPQ
  • BOLT ASSEMBLY:
    • Case Hardened, Shot Peened & MPI Tested
    • Extractor (Fully Assembled)
    • Coating: QPQ

LOWER RECEIVER

  • Platform: SPR GEN3 Precision Machined 7075-t6 Aluminum Lower Receiver
  • Finish: Option
    • Black – MIL-A-8625, Type-III, Class 2
    • Color – Type III Anodizing with Cerakote Ceramic Coatings
  • Trigger: TYPE-A PMC 2-Stage Straight Trigger (3.5lb.)
  • Extension:Carbine 6-Position Buffer Tube
  • End Plate: TYPE-A QD Single Point End Plate (4140 Pre-Hard)
  • Fire Selector: TYPE-A Ambi Billet 90°/45° Adjustable Short Throw Selector
  • Magazine Release: TYPE-A Extended Billet Mag Release
  • Lower Parts: Stainless Steel/Aluminum Detents & Springs

HANDGUARD/RAIL

  • Platform: Option
    • TYPE-A SPR/13.5 GEN3 M-LOK Handguard (8.3 oz.)
  • Finish: Option
    • Black – MIL-A-8625, Type-III, Class 2
    • Color – Type-III Anodizing with Cerakote Ceramic Coatings

FURNITURE

  • Stock: B5 Bravo Stock – BLK
  • Grip: B5 P-Grip – BLK

ACCESSORIES (INCLUDED W/RIFLE)

  • Magazine: MAGPUL PMAG 30 AR/M Magazine
  • Soft Case: 36″ Single Rifle Case
  • ****please note: All NFA rules apply. Please check with your local state laws.
  • ****Please note: Optic & Can not included

Colors Available (Shown in Armor Black)

Note: Any H-Series Cerakote can be sprayed.  There is a $30 up-charge if the color is not in our stock.

  • Magpul™ Olive Drab Green (H-232Q)
  • Magpul™ Flat Dark Earth (H-267Q)
  • Noveske™ Bazooka Green (H-189Q)
  • Tungsten (H-237Q)
  • SIG™ Dark Grey (H-210Q)

Downloads

Keeping Your Gun Running

"If you’re new to an AR platform, here’s the best advice I can give when it comes to cleaning and lube: Run your bolts wet.  You obviously want to keep it clean.  Should you clean after every range session?  Yes.  Is it the end of the world if you don’t?  No.   A well-built rifle like the TYPE-A's can take abuse and run dirty.  They just perform better, and last longer, the more you clean them.  In order to keep them cycling with all sort of different ammo requires good lubrication. The areas to focus on are the bolt and carrier.  As you’re reassembling, give the bolt a healthy dose of lube as well as the carrier.  Not to the point of dripping off, but just shy of.  Understand the less viscous the lube, the quicker it will burn off and dry out. Using something a little thicker will last longer in your gun.  I’ve known guys who used motor oil. These guns aren’t picky as long as you keep them wet."

-Jason Gady

 

Related products