This SPR-14.5 Carbine is chambered in 9MM

This platform is built on a 14.5" Lightweight 416R Stainless Steel Match Grade barrel with a 1/2x36 thread pitch.

Our SPR platform is Glock Compatible allowing you to run your existing Glock 19 & 17 Magazines.

Our 9mm Carriers go through a R.E.M Polish process prior to Nitride coating. The R.E.M Polish process reduces friction, improves part durability, improves oil retention, and improves contact & bending fatigue. Our 9mm Bolt Carrier Groups are Colt and Glock interchangeable.

This rifle has an 14.5" 416R stainless steel barrel with an ASR Ready Muzzle Brake that is permanently affixed. This is done by pinning and welding the muzzle to achieve the over 16" barrel length requirements. Other muzzles options available upon request.

Our pistols run a fully adjustable 45/90 degree short throw safety selector and an extended magazine release to give you that perfect feel. Our charging handle is fully Ambi giving you complete control from either side.

This rifle runs our TYPE-A PMC Two-Stage Trigger. Constructed from pre-hardened 4140 this trigger is coated in Nickel Teflon to fight against friction and to ensure lubricity. The PMC Two-Stage Trigger ships at 1 1/2 reset to 3 1/2 trigger pull.

14.5 PRO G9 9MM CARBINE RIFLE (GLOCK COMPATIBLE)

$1,649.00

CALIBER:	9MM(Glock Mags)
CLASSIFICATION:	Carbine
BARREL LENGTH:	14.5″
HANDGUARD:	SPR/15 GEN3 MLOK
GAS SYSTEM:	Blowback
GAS LENGTH:	N/A
TRIGGER:	2-Stage
MUZZLE:	ASR Suppressor Ready
BCG:	QPQ W/R.E.M Polish
OVERALL LENGTH:	32.5″ OAL
FIRE SELECTOR:	Ambi-Short Throw Adjustable
WEIGHT:	TBD

Description

This TYPE-A SPR-14.5 is built on our all new G9 lower platform with upgraded mil-spec components to make it an incredibly versatile firearm. The SPR-14.5 Carbine is equipped with a 14.5″ 416R Stainless Steel barrel (for weight reduction) and a SPR/15″ GEN2 MLOK Handguard with an ASR Ready Muzzle Brake to give it that aggressive stance. Fully furnished with B5 furniture and a 33 round magazine. The TYPE-A SPR-14.5 Carbine Rifle is driven by our TYPE-A QPQ coated bolt carrier group w/R.E.M. Polish. This BCG is both Colt and Glock compatible. It’s also equipped with our improved TYPE-A PMC Straight 2-stage trigger to give it consistent reliability time after time.

NOTE: All of our parts are Hardcoat Anodized and then Cerakoted to give you a longer lasting more durable finish. We wanted your rifle to wear to the anodized finish vs. the raw aluminum surface. Just another added benefit making your rifle….TYPE-A.

Colors Available (Shown in Armor Black)

Note: Any H-Series Cerakote can be sprayed. There is a $30 up-charge if the color is not in our stock.

Magpul™ Flat Dark Earth (H-267Q)
Sig™Dark Grey (H-210Q)
Noveske™ Bazooka Green (H-189Q))
Tungsten (H-237Q)
Magpul™ Olive Drab (H-232Q)

Features

*(OPTICS/LIGHTS NOT INCLUDED)

BARREL

Caliber: 9MM (Glock Mags)
Length: TYPE-A 14.5″ Lightweight Contour Barrel
Material: 416R Stainless Steel
Twist Rate: 1:10 twist
Finish: Matte Finish
Thread: 1/2×36
Muzzle Device: ASR Ready Muzzle Brake – 1/2×36

UPPER RECEIVER

Platform: SPR GEN3 Precision Machined 7075-t6 Aluminum Upper Receiver with Extended Feed Ramps
Finish: Option
- Black – MIL-A-8625, Type-III, Class 2
- Color – Type-III Anodizing with Cerakote Ceramic Coatings
Charging Handle: TYPE-A Ambi Charging Handle

· BOLT GROUP: TYPE-A QPQ W/REM POLISH BOLT GROUP

· CARRIER:

- Semi-Auto Bolt
- Grade 8 Hardened Fasteners
- Coating: QPQ

· BOLT ASSEMBLY:

- Case Hardened & Shot Peened
- Extractor (Fully Assembled)

LOWER RECEIVER

Platform: SPR G9 Precision Machined 7075-t6 Aluminum Lower Receiver – Glock
Finish: Option
- Black – MIL-A-8625, Type-III, Class 2
- Color – Type III Anodizing with Cerakote Ceramic Coatings
Trigger: TYPE-A PMC 2-Stage Straight Trigger (3.5lb.)
Extension: Carbine 6-Position Buffer Tube
End Plate: TYPE-A QD Single Point End Plate (4140 Pre-Hard)
Fire Selector: TYPE-A Ambi Billet 90°/45° Adjustable Short Throw Selector
Magazine Release: TYPE-A Extended Billet Mag Release
Lower Parts: Stainless Steel and Aluminum Detent/Springs

HANDGUARD/RAIL

Platform: Option
- TYPE-A SPR/15 GEN3 M-LOK Handguard
Finish: Option
- Black – MIL-A-8625, Type-III, Class 2
- Color – Type-III Anodizing with Cerakote Ceramic Coatings

FURNITURE

Stock: B5 Bravo Stock – BLK
Grip: B5 P-Grip – BLK

ACCESSORIES (INCLUDED W/RIFLE)

Magazine: 33 Round Mag
Soft Case: 36″ Single Rifle Case
****please note: All NFA rules apply. Please check with your local state laws.
****Please note: Optic & Can not included

Colors Available (Shown in Armor Black)

Note: Any H-Series Cerakote can be sprayed. There is a $30 up-charge if the color is not in our stock.

Magpul™ Flat Dark Earth (H-267Q)
Sig™Dark Grey (H-210Q)
Noveske™ Bazooka Green (H-189Q))
Tungsten (H-237Q)
Magpul™ Olive Drab (H-232Q)

Reviews

There are no reviews yet.

Be the first to review “14.5 PRO G9 9MM CARBINE RIFLE (GLOCK COMPATIBLE)”

You must be logged in to post a review.

Downloads

Adjusting Your Gas

"If you’re running a rifle with an adjustable gas block, consider the following process for finding your sweet spot. First, close the gas port almost all the way. This means bottoming out the gas port screw and then backing off ¼ turn. Then insert a 1-round mag and fire. If the round doesn’t eject, open the gas port screw another ¼ turn and repeat. Continue this procedure until the casing ejects and the bolt locks back on the empty mag. Once you get good ejection and bolt lock open, open the gas port screw one more ¼ turn. This is your minimum setting for reliable function. Beyond this, you’ll want to group tune the rifle. Your barrel will group differently based on gas setting. If you’re selected ammo is performing good at your minimum setting, then great. If not, then try firing 3 round groups in ¼ turn increments up to 1 whole turn. You should find some improvement in this range."

-Jason Gady

Find A Dealer

14.5 PRO G9 9MM CARBINE RIFLE (GLOCK COMPATIBLE)

Quick Specs

Description