Custom Built TYPE-A Rifles, Firearms
$1,549.00
| CALIBER: | 9mm (Colt Mags) |
| CLASSIFICATION: | Carbine |
| BARREL LENGTH: | 16″ |
| HANDGUARD: | SPR/15 GEN3 MLOK |
| GAS SYSTEM: | Blowback |
| GAS LENGTH: | N/A |
| TRIGGER: | 2-Stage |
| MUZZLE: | ASR Suppressor Ready |
| BCG: | QPQ W/R.E.M Polish |
| OVERALL LENGTH: | 32.5″ |
| Ambi-Short Throw Adjustable | |
| WEIGHT: | Classified |
We had two things in mind when it came to the redesign of the SPR GEN3 Platform; weight reduction and functionality. Our first improvement started with functionality on the lower receiver components. We moved away from standard mil-spec components, upgrading to a ambi billet adjustable 90°/45° short throw fire selector, extended billet magazine release, improved pivot/breakdown pins, and most importantly stainless steel detents/springs/roll pins/trigger pins/etc. Our second functionality improvement came from the upper receiver and since we were on a mission to make this rifle semi ambidextrous, we decided to upgrade to an ambi charging handle. The next upgrade came in the form of weight reduction on the front end. We made some weight improvements on our all new GEN3 SPR/15 handguard by opening up the offsets to accept M-LOK attachments and off-setting an optional 45° QD M-LOK insert towards the backend of the handguard.
This TYPE-A SPR-16 is built on our all new C9 lower platform with upgraded mil-spec components to make it an incredibly versatile firearm. The SPR-16 Carbine is equipped with a 16″ vanadium alloy steel barrel (for weight reduction) and a SPR/15″ GEN2 MLOK Handguard with a SILENCERCO ASR Ready flash hider to give it that aggressive stance. Fully furnished with B5 furniture 33 round capacity magazines. The TYPE-A SPR-16 Carbine is driven by our TYPE-A QPQ coated bolt carrier group w/R.E.M. Polish. This BCG is both Colt and Glock compatible. It’s also equipped with our improved TYPE-A PMC Straight 2-stage trigger to give it consistent reliability time after time.
NOTE: All of our pistols are Hardcoat Anodized and then Cerakoted to give you a longer lasting more durable finish. We wanted your rifle to wear to the anodized finish vs. the raw aluminum surface. Just another added benefit making your rifle….TYPE-A.
Colors Available (Shown in Hardcoat Anodized Black)
You must be logged in to post a review.
"If you’re running a rifle with an adjustable gas block, consider the following process for finding your sweet spot. First, close the gas port almost all the way. This means bottoming out the gas port screw and then backing off ¼ turn. Then insert a 1-round mag and fire. If the round doesn’t eject, open the gas port screw another ¼ turn and repeat. Continue this procedure until the casing ejects and the bolt locks back on the empty mag. Once you get good ejection and bolt lock open, open the gas port screw one more ¼ turn. This is your minimum setting for reliable function. Beyond this, you’ll want to group tune the rifle. Your barrel will group differently based on gas setting. If you’re selected ammo is performing good at your minimum setting, then great. If not, then try firing 3 round groups in ¼ turn increments up to 1 whole turn. You should find some improvement in this range."
-Jason Gady
Reviews
There are no reviews yet.