BG Defense

Custom Built TYPE-A Rifles, Firearms

Find A Dealer

TYPE-A SPR-18S PRO GEN2 .223 WYLDE LONG RIFLE (13.5" HANDGUARD)
TYPE-A SPR-18S PRO GEN2 .223 WYLDE LONG RIFLE (13.5" HANDGUARD)
This rifle is chambered in .223 Wylde. The Wylde barrel was designed to exploit the benefits of the .223 Remington's accuracy while not over pressurizing the chamber to accommodate the 5.56 NATO round.
This platform is built on a fluted 416R stainless Steel barrel with a matte finish. all .223 Wylde barrels are threaded with a 1/2X28 pitch.
Our 18" Direct Impingement Long Rifle run a rifle gas system to mitigate recoil and gas blow back.
All of our Bolt Carriers go through a R.E.M Polish process prior to nitride coating. The R.E.M Polish process reduces friction, improves part durability, improves oil retention, and improves contact & bending fatigue. Our Bolts are MPI (magnetic Particle Inspected) and coated in a durable nitride finish.
This DI Rifle comes equipped with an 416R stainless steel 30 position adjustable gas block to give you the ability to make adjustments. This will give you the ability to fine tune your rifle to the ammo, buffer/buffer spring, and/or suppressed.
Our pistols run a fully adjustable 45/90 degree short throw safety selector and an extended magazine release to give you that perfect feel. Our charging handle is fully Ambi giving you complete control from either side.
This rifle runs our TYPE-A PMC Two-Stage Trigger. Constructed from pre-hardened 4140 this trigger is coated in Nickel Teflon to fight against friction and to ensure lubricity. The PMC Two-Stage Trigger ships at 1 1/2 reset to 3 1/2 trigger pull.

223 WYLDE SPR-18S PRO GEN 2 LONG RIFLE (13.5″ HANDGUARD)

1,899.00

SHARE

Quick Specs

CALIBER: .223 WYLDE
CLASSIFICATION: Rifle
BARREL LENGTH: 18″
HANDGUARD: SPR/13.5 GEN3 MLOK
GAS SYSTEM: 30 Position Adjustable
GAS LENGTH: Rifle
TRIGGER: 2-Stage
MUZZLE: ASR Suppressor Ready
BCG: QPQ W/R.E.M Polish
OVERALL LENGTH: 35″ OAL
FIRE SELECTOR: Ambi-Short Throw Adjustable
WEIGHT: Light as a Feather

 

Description

This TYPE-A SPR-18S Pro is built on an accurate Long Rifle platform with proven mil-spec components to make it an incredibly versatile rifle. The SPR-18S Pro long rifle is equipped with a 18″ 416R Stainless steel fluted barrel (improved accuracy) and a SPR/13.5 GEN3 MLOK Handguard with a ASR Ready muzzle to give it that aggressive stance. Fully furnished with B5 furniture, and 30 round capacity magazines. The TYPE-A SPR-18S Pro rifles is driven by our TYPE-A Titanium Nitride bolt carrier group w/R.E.M Polish.  It’s also equipped with a 30 Position Adjustable DGI (direct gas impingement) system and our new TYPE-A PMC Straight 2-stage trigger to give it consistent reliability time after time.

NOTE:  All of our rifles are Hardcoat Anodized and then Cerakoted to give you a longer lasting more durable finish.  We wanted your rifle to wear to the anodized surface vs. the raw aluminum surface like some of our competitors.  Just another added benefit making our rifles…TYPE-A.

****Please Note: All NFA rules apply. Please check with your local state laws.

Colors Available: (*Shown in Armor Black)

Note: Any H-Series Cerakote can be sprayed.  There is a $30 up-charge if the color is not in our stock.

  • Magpul™ Olive Drab Green (H-232Q
  • Magpul™ Flat Dark Earth (H-267Q)
  • Noveske Bazooka Green (H-189Q)
  • Tungsten (H-237Q)
  • SIG™ Dark Grey (H-210Q)

Features

BARREL

  • Caliber: .223 WYLDE (****Shoots both 5.56 NATO & .223 Remington)
  • Length: TYPE-A 18″ Heavy Contour Barrel
  • Gas block: 30 Position Adjustable Gas Block – 416R SS Matte Finish
  • Material: 416R Stainless Steel
  • Gas System: Rifle
  • Twist Rate: 1:7 twist
  • Finish: Matte
  • Thread: 1/2×28
  • Muzzle Device: ASR Ready Muzzle Brake – 1/2×28

UPPER RECEIVER

  • Platform: SPR GEN2 Precision Machined 7075-t6 Aluminum Upper Receiver with Extended Feed Ramps
  • Finish: Option
    • Black – MIL-A-8625, Type-III, Class 2
    • Color – Type-III Anodizing with Cerakote Ceramic Coatings
  • Charging Handle: TYPE-A Ambi Charging Handle

  • Bolt Carrier Group: TYPE-A TiN W/REM POLISH BOLT CARRIER GROUP

  • CARRIER:
    • Semi-Auto Bolt Carrier
    • Gas Key (Staked)
    • Gas Key Hardened to USGI Specifications
    • Grade 8 Hardened Fasteners
  • BOLT ASSEMBLY:
    • Case Hardened, Shot Peened & MPI Tested
    • Extractor (Fully Assembled)

LOWER RECEIVER

  • Platform: SPR GEN2 Precision Machined 7075-t6 Aluminum Lower Receiver
  • Finish: Option
    • Black – MIL-A-8625, Type-III, Class 2
    • Color – Type III Anodizing with Cerakote Ceramic Coatings
  • Trigger: TYPE-A PMC 2-Stage Straight Trigger (4lb.)
  • Extension: 6-Position Adjustable Buffer Tube – Carbine Length
  • End Plate: TYPE-A QD Single Point End Plate (4140 Pre-Hard)

HANDGUARD/RAIL

  • Platform: Option
    • TYPE-A SPR/13.5 GEN3 M-LOK Free Float Rail
  • Finish: Option
    • Black – MIL-A-8625, Type-III, Class 2
    • Color – Type-III Anodizing with Cerakote Ceramic Coatings

FURNITURE

  • Stock: B5 Bravo Stock – BLK
  • Grip: B5 P-Grip – BLK

ACCESSORIES (INCLUDED W/RIFLE)

  • Magazine: DURAMAG 20 Round Magazine
  • Soft Case: 36″ Single Rifle Case

Colors Available (*Shown in Armor Black)

30 Position Adjustable Gas Block – 416R SS Matte Finish

  • Magpul™ Olive Drab Green (H-232Q)
  • Magpul™ Foliage Green (H-231Q)
  • Magpul™ Flat Dark Earth (H-267Q)
  • Mapgul™ Stealth Grey (H-188Q)
  • Noveske Bazooka Green (H-189Q)
  • Tungsten (H-237Q)

Reviews

There are no reviews yet.

Be the first to review “223 WYLDE SPR-18S PRO GEN 2 LONG RIFLE (13.5″ HANDGUARD)”

Downloads

TS322318R BGD1013

Accessorizing your Rifle

"If you are new to the AR platform, be sure to figure out the main purpose of your rifle.  If you want to kit out your rifle with the sole intent of looking sexy in the mirror, then load it up.  If you don’t want to waste money, and get the best shooting experience out of your rifle, then consider the following: Start with optics.  Do you plan to run anything other than irons?  If so, mount the best quality optic you can afford.  If you use an optic (magnified or non-magnified), plan on mounting a backup sighting system…..such as offset irons.  Next, will this be a work or home defense gun?  If yes, you better throw a light on the rail.  There’s a million different options out there but be sure to pick one that meets your needs without taking up unnecessary real estate on your gun.  Also, will you be mounting a sling?  If you’re going to use the rifle, at all, you definitely want a way to hang it off your torso. I would consider anything beyond these accessories as extra. Spend some time behind your rifle and work on the basics.  From there, you can figure out what else you might want (vertical grips, different stock……..).  If it’s loaded down heavy to start, you’ll probably end up stripping stuff off the more you train with it.  Spending money on ammo is much more valuable than unused accessories."

- Jason Gady

Related products